Find your local stockist here!

Accessories & Tools

The perfect fit - every time

Get the perfect look for your cladding with a precise cut and fit, using our purpose-made tools and accessories. Ranging from a low-dust blade for perfect straight cutting, and a Gecko Gauge that practically eliminates layout time, to extra strength fixings that keep your cladding put, whatever the weather.

HardieBlade™ Saw Blade

Specially designed to produce only a very low amount of dust, this circular blade is perfect for straight-cutting JamesHardie® fibrecement products. Using continuous disk or wood blades causes excessive levels of dust and very fast blade wear. Using HardieBlade™ circular saw keeps blade costs and dust levels down.

Available in 160mm, fitting 20/16mm bores, 190mm, fitting 30/20mm bores and 254mm and 305mm, fixed at 30mm bores, diameters. For outdoor use only.

The HardieBlade™ circular blade is perfect for staight cutting all our fibre cement products. 

HardiePanel™ Screws

A range of purpose-made fixings for HardiePanel® cladding with matching coloured heads. Available in all 21 ColourPlus™ cladding colours.
Size: 4.8x38mm diameter, head 12mm.

EPDM Tape

The high-quality EPDM tape protects wooden battens from the elements and ensures clean joints. Available in 20 m rolls of 60, 80, 100 and 120mm wide. Colour: black

HardieClip™

Provides extra strength when fixing HardiePlank® cladding, as it distributes the stress of wind blowing in over a wider area.

Gecko Gauge

The Gecko Gauge is like an extra set of hands for fast, accurate HardiePlank® cladding installation. It practically eliminates layout time. For 8mm thick fibre cement cladding products. Preset to the standard reveal of 150mm for 180mm wide HardiePlank® cladding.

HardieGuillotine™

Custom-designed manual tool that cuts HardiePlank® cladding fast and accurately every time, with no breaking, chipping or sawing dust. The cutting movement is tightly controlled to enable safe, precise cutting of even the smallest slivers of material.

HardieSeal Edge Coating

These ColourPlus™ Technology matched paints, compatible with the factory finish, are essential for the correct and warranted installation of JamesHardie® cladding materials. Use edge coating paint for coating cut ends to ensure long-lasting performance of the facade. It provides excellent coverage in a single layer and dries quickly, saving precious building time.

Starter Strip & Ventilation Profile

Combination starter strip and ventilation profile for HardiePlank® cladding. Available in three depths to suit battens with a thickness of 25mm, 38mm and 50mm.

Top Ventilation Strip

Top ventilation profile which can be used for all types of JamesHardie® cladding. Available in three depths to suit battens with a thickness of 25mm, 38mm and 50mm.

Horizontal Drip Profile

Manufactured from high-quality coated aluminium in 3000mm lengths, these drip profiles, specifically designed for HardiePanel® cladding, protect the horizontal joints. Only required above 600m altitude.

Why James Hardie Cladding?

  • Flexible design with 21 colours & 2 textures
  • Cost effective premium cladding solution
  • Durable & Low maintenance
  • ColourPlus™ Technology
  • Non combustible A2 fire rated
×